Archive for the ‘Danby Dishwasher Parts’ Category

Danby Dishwasher spray arms do not move or spray water

March 16, 2010

I have a Danby Dishwasher, model number ddw1805w, it fills, heats, and the dial moves, but it doesn’t wash and the spray arms do not spray any water. Any suggestions?

Answer: First, always unplug your appliance or disconnect power before working on it.

Make sure that nothing is blocking the sprayer arms. Some models of dishwashers have an alternating sprayer arm washing system. What this does is cycle the washing action between the lower sprayer arm and the middle sprayer arm. The cycle begins with the lower arm spraying first, then switching over to the middle sprayer arm, and back again through-out the washing cycle. The sprayer arms will pause as they switch over from one to the other, making it sound like the sprayer arms aren’t turning.

If you’re sure that the arms are not turning at all, open the dishwasher and verify that nothing is blocking the sprayer arm rotation, and that there is water in the bottom of the sump covering the filter area.

Try removing the bottom spray arm, pump cover and secondary filter assembly to clean out the area. Sometimes food particles and debris gather here.

Check the holes in the dishwasher’s spray arms to make sure that they are not blocked up. Sometimes food particles can block the spray arm holes.

For more help or to purchase Danby Dishwasher Parts, visit APWagner.ca.